Downloadable brochures and spec sheets for current and non-current models are here.
ZAXIS35U
ENGINE
| Model | Yanmar 3TNV88 |
| Type | 4-cycle water-cooled, direct injection |
| No. of cylinders | 3 |
| Rated power ISO 9249, net | 21.3 kW (28.5 HP) at 2 400 min-1 (rpm) |
| Rated power EEC 80/1269, net | 21.3 kW (28.5 HP) at 2 400 min-1 (rpm) |
| Rated power SAE J1349, net | 21.3 kW (28.5 HP) at 2 400 min-1 (rpm) |
| Rated power DIN 6271, net | 21.2 kW (28.4 HP) at 2 400 min-1 (rpm) |
| Rated power Gross | 22.0 kW (29.5 HP) at 2 400 min-1 (rpm) |
| Maximum torque | 106 Nm (10.8 kgf m) at 1 000 min-1 (rpm) |
| Piston displacement | 1.642 L |
| Bore and stroke | 88 mm x 90 mm |
| Electric system Voltage | 12 V |
| Electric system Battery | 55 Ah |
| Electric system Alternator | 55 A |
| Electric system Starter motor | 2.3 kW |
HYDRAULIC SYSTEM
| Main pumps | 2 variable displacement axial piston pumps 1 gear pump |
| Main pumps Maximum oil flow | 2 x 38.4 L/min 1 x 25.2 L/min |
| Pilot pump | 1 gear pump |
| Pilot pump Maximum oil flow | 10.8 L/min |
| Auxiliary Maximum oil flow | 63.6 L/min |
Hydraulic Motors
| Travel | 2 variable displacement axial piston motors |
| Swing | 1 axial piston motor |
Relief Valve Settings
| Implement circuit | 24.5 MPa (250 kgf/cm2) |
| Swing circuit | 16.7 MPa (150 kgf/cm2) |
| Travel circuit | 24.5 MPa (250 kgf/cm2) |
| Pilot circuit | 3.9 MPa (40 kgf/cm2) |
| Auxiliary circuit | 24.5 MPa (250 kgf/cm2) |
Hydraulic Cylinders
High-strength piston rods and tubes. Cylinder cushion mechanisms provided in boom and arm cylinder to absorb shock at stroke ends.
Dimensions
Hydraulic Filters
Hydraulic circuits use high-quality hydraulic filters. A suction filter is incorporated in the suction line, and full-flow filters in the return line.
CONTROLS
Hydraulic pilot controls levers for all operations.
| Implement levers | 2 |
| Travel levers with pedals | 2 |
| Blade lever | 1 |
UPPERSTRUCTURE
Revolving Frame
Welded sturdy box construction, using heavy-gauge steel plates for ruggedness. D-section frame for resistance to deformation.
Swing Device
Axial piston motor with planetary reduction gear is lubricated by hydraulic oil. Swing circle is single-row, shear-type ball bearing with induction-hardened internal gear. Internal gear and pinion gear are immersed in lubricant. Swing parking brake is spring-set/hydraulic-released disc type.
| Swing speed | 9.0 min-1 (rpm) |
| Swing torque | 5.47 kNm (558 kgf m) |
Operator's Cab
Independent spacious cab, 960 mm wide by 1 520 mm high, conforming to ISO* Standards. Reinforced glass windows on 4 sides for visibility. Front windows (upper and lower) can be opened. Reclining seat.
* International Standardization Organization
UNDERCARRIAGE
Tracks
Tractor-type undercarriage. Welded track frame using selected materials. Side frame welded to track frame.
Numbers of Rollers on Each Side
| Upper rollers | 1 |
| Lower rollers | 4 |
Travel Device
Each track driven by 2-speed axial piston motor through planetary reduction gear for counterrotation of the tracks. Sprockets are replaceable. Parking brake is spring-set/hydraulic-released disc type.
| Travel speeds | High : 0 to 4.4 km/h Low : 0 to 2.9 km/h |
| Maximum traction force | 27 kN (2 750 kgf) |
| Gradeability | 58 % (30 degree) continuous |
WEIGHTS AND GROUND PRESSURE
Equipped with 2.47 m boom, 1.32 m arm and 0.11 m3 bucket (ISO heaped) rubber shoes 300 mm.
* (Operating weight with 0.11 m3 bucket if fully serviced +80 kg operator ISO 6016).
SERVICE REFILL CAPACITIES
| Fuel tank | 40.0 L |
| Engine coolant | 5.0 L |
| Engine oil | 7.2 L |
| Travel device (each side) | 0.6 L |
| Hydraulic system | 56.0 L |
| Hydraulic oil tank | 32.0 L |
BACKHOE ATTACHMENTS
Boom and arms are of welded, box-section design. 2.47 m boom, 1.32 m and 1.72 m arms are available.
Buckets
