Downloadable brochures and spec sheets for current and non-current models are here.
ZAXIS17U
ENGINE
| Model | Yanmar 3TNV70 |
| Type | Water-cooled, 4-cycle, 3-cylinder swirl combustion chamber injection type diesel engine |
| Rated power ISO 9249, net | 11.0 kW (14.8 HP) at 2 400 min-1 (rpm) |
| Maximum torque | 50.2 N m (5.1 kgf m) at 1 850 min-1 (rpm) |
| Piston displacement | 0.854 L (854 cc) |
| Bore and stroke | 70 mm x 74 mm |
| Battery | 1 x 12 V/36 Ah |
HYDRAULIC SYSTEM
The proven 3-pump system and arm regenerative circuit have been improved to make combined operations and fine control easier and smoother.
| Main pumps | 2 variable displacement axial piston pumps |
| Main pumps Maximum oil flow | 2 x 19.2 L/min |
| Third pumps | 1 gear pump |
| Third pumps Maximum oil flow | 12.5 L/min |
| Pilot pump | 1 gear pump |
| Pilot pump Maximum oil flow | 6.5 L/min |
Relief Valve Settings
| Main pumps circuit | 20.6 MPa (210 kgf/cm2) |
| Third pumps | 20.6 MPa (210 kgf/cm2) |
| Pilot circuit | 3.9 MPa (40 kgf/cm2) |
Hydraulic Cylinders
High-strength piston rods and tubes. Cylinder cushion mechanisms provided in boom raise circuits to absorb shocks at stroke ends.
Dimensions
CONTROLS
Hydraulic pilot control levers for all operations.
Mechanical linkage control levers only for variable legs.
SWING MECHANISM
Hight-torque, orbit motor. Swing circle is single-row, shear-type ball bearing with induction-hardened internal gear. Internal gear and pinion are immersed in lubricant.
| Swing speed | 8.9 min-1 (8.9 rpm) |
UNDERCARRIAGE
Tracks
Tractor-type undercarriage. Welded track frame using carefully selected materials. Side frame extended by cylinder span.
Numbers of Rollers on Each Side
| Lower rollers | 3 |
Travel Device
Each track driven by a high-torque, 2-speed axial piston motor through planetary reduction gear, allowing counter-rotation of the tracks.
| Travel speeds (with rubber shoes) | High : 0 to 4.3 km/h Low : 0 to 2.4 km/h |
| Gradeability | 58 % (30 degree) continuous |
WEIGHTS AND GROUND PRESSURE
Equipped with 0.93 m arm and 0.044 m3 (ISO 7451 capacity) bucket.
SERVICE REFILL CAPACITIES
| Fuel tank | 19.5 L |
| Engine coolant | 2.7 L |
| Engine oil | 3.1 L |
| Travel device (each side) | 0.25 L |
| Hydraulic system | 30.0 L |
| Hydraulic oil tank (Reference oil level) | 15.7 L |
BACKHOE ATTACHMENTS
BUCKETS
A : General digging B : Light-duty digging C : Loading
